Leave Your Message

China Suppliers Factory: Negative One Positive Two Lifting and Horizontal Moving Stereo Garage System

The innovative parking solution features a three-layer design, consisting of an upper, middle, and lower section, with one layer underground and two layers above ground. This advanced system allows for seamless vehicle storage and retrieval. The upper and lower parking spaces can be raised or lowered, while the middle layer can shift horizontally. When vehicles need to be parked or retrieved from the upper and lower levels, the middle section clears out to create space. Vehicles from the top and bottom levels are then elevated or lowered to ground level for easy access. Additionally, the middle layer serves as an active parking area, enabling direct entry and exit for vehicles. As a leading China supplier and factory of parking equipment, we offer reliable and efficient solutions for any parking needs.

    Technical features of the equipment

    Save the ground, make full use of the underground space, and increase the number of parking spaces.

    The motor chain drive has stable operation and low noise.

    Simple structure, good stability, and easy maintenance.

    Technical features of the equipment
    Design parameters
    Model Negative one positive two lifting and lateral movement
    Vehicle dimensions (L×W×H) 5000mm×1850mm×1750/1550mm
    Vehicle weight ≤2350kg
    Drive mode Motor chain drive
    Motor Lifting: 2.2kw    lateral movement: 0.2kw
    Power supply Three-phase five-wire 380V/50HZ
    Speed Lifting: 4.2m/min    lateral movement: 8m/min
    Control PLC logic automatic control
    Operation Key, IC card operation
    Safety device ● Warning device during operation ● Anti-fall device
    ● Emergency stop device ● Up and down limit protection device
    ● Current overload protection ● Transverse limit protection device
    ● Photoelectric detection device at the entrance ● Up and down positioning switch
    ● Wheel stop bar ● Power-off brake device
    ● Lateral positioning switch ● Safety interlock device
    ● Chain protection cover ● Excess length detection
    Design parameters details 1
    Design parameters details 2
    Design parameters details 3
    Frequently Asked Questions

    QWhat are the primary benefits of this parking equipment?

    This system saves ground space by making full use of underground areas, which significantly increases the total number of parking spaces available. Additionally, it features a stable, low-noise motor chain drive and a simple, stable design for easy maintenance.

    QWhat are the maximum vehicle specifications allowed?

    The system accommodates vehicles with maximum dimensions of 5000mm in length, 1850mm in width, and 1750/1550mm in height. The maximum allowable vehicle weight is 2350kg.

    QHow is the parking system operated and controlled?

    The system is managed using a PLC logic automatic control system. Users can operate the equipment easily using either a physical key or an IC card.

    QWhat are the power requirements and motor specifications?

    The equipment operates on a three-phase five-wire 380V/50HZ power supply. It is equipped with a 2.2kw motor for lifting functions and a 0.2kw motor for lateral movement.

    QWhat safety features are integrated into the system?

    The system is highly secure, featuring emergency stop devices, anti-fall devices, up/down and transverse limit protection, current overload protection, photoelectric entrance detection, wheel stop bars, positioning switches, chain protection covers, safety interlocks, power-off brakes, and excess length detection.

    Leave Your Message

    AI Helps Write