0102030405
Two-Story Car Lifting and Sliding Garage System by China Suppliers and Factory for Efficient Vehicle Storage
Technical Features of the Equipment
◆
The equipment occupies a small area and has high space utilization. The number of columns can be reasonably arranged according to user requirements.
◆
Make full use of space to increase the number of parking lots several times.
◆
Serialized and standardized design, reasonable structure, multiple protection devices, safe and reliable.
◆
Flexible layout, convenient combination, and can adopt various types to form a large parking lot.
◆
Low equipment cost and low maintenance cost.
◆
Smooth operation, low noise, and convenient storage and retrieval.
◆
All-round safety protection such as anti-falling, people and vehicles entering by mistake, vehicle over-length alarm, undervoltage and phase loss, overcurrent, power-off self-locking, emergency stop, etc.
◆
Fully automatic PLC control, using buttons, IC cards, remote control and other control methods, simple operation.
◆
Motor chain lifting drive system, balanced and reliable operation.
◆
Freely selectable operation mode: button type, touch screen type, card swiping type.
◆
High safety factor, the system has the following safety devices: anti-falling device, emergency stop button, over-limit operation prevention device, front photoelectric switch, over-height alarm device, etc.
Design Parameters
| Model | Two-layer lifting and lateral movement type | |
| Vehicle size (L×W×H) | 5000mm×1850mm×1750/1550mm | |
| Vehicle weight | ≤2350kg | |
| Drive mode | Motor chain drive | |
| Motor | Lifting: 2.2kw lateral movement: 0.2kw | |
| Power supply | Three-phase five-wire 380V/50HZ | |
| Speed | Lifting: 4.2m/min lateral movement: 8m/min | |
| Control | PLC logic automatic control | |
| Operation | Key, IC card operation | |
| Safety devices | ● Warning device during operation | ● Anti-fall device |
| ● Emergency stop device | ● Up and down limit protection device | |
| ● Current overload protection | ● Transverse limit protection device | |
| ● Photoelectric detection device at the entrance | ● Up and down positioning switch | |
| ● Wheel stop bar | ● Power-off brake device | |
| ● Lateral positioning switch | ● Safety interlock device | |
| ● Chain protection cover | ● Excess length detection | |
Frequently Asked Questions
What are the dimensions and weight limits for vehicles using this equipment?
The equipment is designed for vehicles with a maximum size of 5000mm × 1850mm × 1750/1550mm (L×W×H) and a maximum weight of ≤2350kg.
What safety protection devices are integrated into the system?
The equipment features comprehensive safety devices, including anti-falling devices, emergency stop buttons, over-limit operation prevention, photoelectric entrance detection, over-height alarms, current overload protection, and power-off brakes.
What control and operation options does the system support?
It uses a fully automatic PLC logic control system. Users can freely choose between button operation, touch screen interface, or IC card swiping.
What are the power requirements and motor specifications?
The system requires a three-phase five-wire 380V/50HZ power supply. It is powered by a 2.2kw motor for lifting and a 0.2kw motor for lateral movement.
How fast does the lifting and lateral movement operate?
The lifting speed is 4.2 meters per minute (4.2m/min), and the lateral movement speed is 8 meters per minute (8m/min), ensuring smooth and efficient retrieval.