0102030405
Continuous Ultrafine Grinding System for Zirconium Silicate – China Factory High-Quality Suppliers
Product advantage
Layout diagram
1
Grinding fineness up to 10000 mesh, uniform particle size distribution, stable and reliable quality.
2
There is no phenomenon in continuous zirconium silicate ultrafine pulping ball mill, there will be no spraying injury, there is no need to manually discharge the pulp, which greatly improves the operation safety of workers.
3
Save energy, while reducing the total grinding time to improve the grinding efficiency, the customer's actual use data shows that compared with the traditional intermittent ball mill energy saving 9.8%.
4
The feed transfer cylinder through the accurate weight reduction measurement method by the computer program according to the formula to control the feed, to solve the problem of raw material formula feed control.
5
The intermediate pulping device of the system adopts the transition mode developed independently to ensure that the intermediate pulping device will not leak pulp during long-term operation of the equipment, and can supplement the grinding medium and water at the same time.
6
Continuous ball mill can contain 3 ~ 6 units with an independent drive system of the ball mill, each unit design has an independent speed and stone ratio, according to the raw material situation and the required powder fineness requirements, choose the appropriate stone ratio and speed, so as to achieve the highest efficiency.
7
Intelligent control, greatly save labor, and reduce the labor intensity of workers, save the time of unloading.
Main technical parameters
| Model | Volume (m³) | Cylinder Size (mm) | Type of Lining | Grinding Media |
|---|---|---|---|---|
| QCX2582 | 36.8 | φ2500×8200 | High alumina lining | Zirconium aluminum/high aluminum ball |
| QCX2590 | 40.6 | φ2500×9000 | High alumina lining | Zirconium aluminum/high aluminum ball |
| QCX2870 | 39 | φ2800×7000 | High alumina lining | Zirconium aluminum/high aluminum ball |
| QCX3084 | 54.6 | φ3000×8400 | High alumina lining | Zirconium aluminum/high aluminum ball |
| QCX3370 | 54.5 | φ3300×7000 | High alumina lining | Zirconium aluminum/high aluminum ball |
Note: Continuous ball mill combined use, can be adjusted according to customer output and fineness.
Key Features
Continuous Operation
Enables uninterrupted grinding and discharge, improving productivity and process stability.
Ultrafine Output
Capable of achieving particle sizes as fine as 1–5 microns, ideal for zirconium silicate’s application in high-performance ceramics and paints.
Precision Control
Adjustable grinding speed, media size, and residence time for tailored particle size distribution and quality control.
Low Contamination Design
Made with wear-resistant materials to preserve the high purity of zirconium silicate and prevent media or liner contamination.
Closed-Circuit Capability
Integrates seamlessly with classifiers or separators to achieve precise cut sizes and maintain narrow particle distribution.
Applications
Advanced Ceramics (e.g., dental ceramics, tiles)
Paints and Coatings
Refractories and Foundry Materials
Electronic Components
Abrasives and Fillers
Advantages
High product purity and whiteness
Energy-efficient and cost-effective continuous operation
Reduced downtime and minimal maintenance
Scalable design for various production capacities
Frequently Asked Questions
Q
What is the maximum grinding fineness of this continuous ball mill?
The mill can achieve an ultra-fine grinding fineness of up to 10,000 mesh, providing a highly uniform particle size distribution and stable quality.
Q
How does this system save energy compared to traditional mills?
By optimizing the grinding efficiency and reducing the total grinding time, actual customer data demonstrates an energy saving of 9.8% compared to traditional intermittent ball mills.
Q
How does the continuous zirconium silicate ball mill improve operational safety?
The closed, continuous system prevents pulp spraying injuries and eliminates the need for manual pulp discharge, significantly improving safety conditions for operators.
Q
Can the mill configuration be adjusted for custom output and fineness?
Yes, the continuous ball mill system can contain 3 to 6 units with independent drive systems. Speed, stone ratio, and combination configuration can be tailored to meet specific production capacity and fineness requirements.
Q
How is the purity of zirconium silicate maintained during the process?
The mill uses a low-contamination design featuring high alumina lining and zirconium aluminum or high aluminum ball grinding media, which prevents media contamination and maintains high whiteness and purity.